Filter
Top Products
Using the AUX Sends
VM200 User’s Guide
115
Using the AUX Sends
The VM200 features four auxiliary (AUX) sends, which enable you to
send a signals to various destinations. You can send signals from
input channels 1 through 20 to AUX Sends 1 through 4. You can use
the four AUX Sends individually or in stereo pairs.
You can configure each channel AUX Send as a pre-fader or
post-fader send.
AUX Sends 1 through 4 signals are routed to the AUX SEND 1
through 4 jacks respectively. (AUX 3 & 4 are available only if you turn
on the ADD.AUX parameter, as described below.)
The VM200 also features a Smoothing function that reduces CPU load
to achieve smoother fader adjustment.
The VM200 does not include dedicated AUX return inputs. Use the
insert channels to return AUX signals. For more information, see
“Insert Channels 1–4” on page 62.
Enabling AUX Sends 3 & 4 (ADD. AUX Parameter)
If you wish to use AUX Sends 3 & 4, you must turn on the ADD. AUX
parameter on the
CURRENT SCENE STATUS
function page.
1.
Press the
[CURRENT SCENE STATUS]
key.
The VM200 displays the
CURRENT SCENE STATUS
function page.
2.
Rotate the EQ/LO-MID Gain control to turn on the ADD.AUX
parameter.
The ON indicator in the ADD. AUX parameter field flashes.
3.
Press the
[ENTER]
key to confirm the change.
4.
Press the
[EXIT]
key to display the
CHANNEL EDIT
function page.
Note:
When the ADD.AUX parameter is turned on, the REC BUSS OUT
jacks function as AUX Sends 3 and 4, and the REC BUSS OUT routing
is disabled.
R4 L3 2
1
ADD.AUX SEND
AUX SENDREC BUSS OUT
AUX Sends 1–4
ADD.AUX parameter