Filter
Top Products
Outputs
118
VM200 UserÕs Guide
2.
Use the Freq and Q rotary controls for channels 1–4 to select
PRE or POST for AUX1, AUX2, AUX3, and AUX4.
The default setting is POST.
When you change the setting, the selected value flashes.
3.
Press the
[EXIT]
key to display the
CHANNEL EDIT
function page.
Muting AUX Sends
You can mute the AUX Send Masters by turning off the [ON] key for
the Master channel.
Since the Master
[ON]
key can also mute the Stereo Buss and Effects
Send master outputs, depending on the Fader Mode, you need to
press the
[AUX1], [AUX2], [AUX3]
, or
[AUX4]
key to select an AUX Send
before you can mute it.
1.
Press the
[AUX1], [AUX2], [AUX3]
, or
[AUX4]
key to select an AUX
Send.
The selected AUX key flashes.
2.
Use the MASTER
[ON]
button to turn the AUX Send on and off.
When AUX Sends are configured as stereo pairs, their
[ON]
buttons
are linked (see “Pairing Channels” on page 68).
See “[ON] Keys” on page 34 for more information.
ON
SOLO
Master ON key