Fostex VM200 TV Cables User Manual


 
Scene Memory
156
VM200 User’s Guide
Editing Scene Memory Titles
You can edit scene names by recalling a scene and re-naming it.
Refer to the “Recalling Mix Scenes” on page 151 and “Storing Mix
Scenes” on page 154 for more information.
Recall Safe Function
When you recall a scene, all parameters are updated with settings
from the new scene. However, in some cases you may wish to retain
the settings for specific channels or parameters.
The VM200 features a Recall Safe function that enables you to desig-
nate channels and certain parameters as “recall safe.” When a new
scene is recalled, “safe” channels and parameters are not updated.
Recall Safe settings are available for each input channel 1-20 and for
the following parameters:
Channel Fader
Channel Pan
Channel On
Routing
AUX1, AUX2, AUX3, AUX4
EFF1, EFF2
EQ
EQ On
You can specify safe channels using the CH RCL SAFE function page. You
can specify safe parameters on the RCL SAFE function page.
Specifying Recall Safe Channels
The VM200 features a Recall Safe function that enables you to desig-
nate input channels 1-20 as “recall safe.” When a new scene is
recalled, “safe” channels are not updated.
1. Press the [SYSTEM] key three times.
The VM200 displays the 3:CH RCL SAFE function page. All selectable
[EQ EDIT] keys flash.
2. Select a channel layer by pressing Page Select key [1–8 ANA-
LOG IN], [9–16 ADAT IN], or [17–20 EFF RTN].