Filter
Top Products
Scene Memory
152
VM200 User’s Guide
You can select one of the following options: LAST-STORED, P0, P1,
P2, 0–99. The default setting is “LAST-STORED,” which causes the
most-recently stored scene to be recalled.
1.
Press the
[SYSTEM]
key five times.
The VM200 displays the
5:PWR ON RCL
function page.
2.
Use the Data Wheel or the
[</-1]
and
[+1/>]
keys to select a
scene.
You can select one of the following:
❑
any Preset scene (P0, P1, P2)
❑
any User scene (0-99)
❑
LAST-STORED (the last scene you stored)
The selected item flashes in the Scene Number field in the lower
left corner.
3.
Press the
[ENTER]
key to confirm the selection.
The next time you power on the VM200, the selected scene will be
automatically recalled.
Recalling Mix Scenes Using MIDI Program Change Messages
You can use MIDI Program Change messages to recall scenes for
snapshot-style mix automation.
You can transmit Program Change messages from a computer, MIDI
sequencer, or MIDI keyboard. Most MIDI keyboards transmit a Pro-
gram Change message when a voice is selected. You can use this
message to recall a scene on the VM200. Using this technique, the
synthesizer and VM200 can be reconfigured instantaneously.
To recall scene memories using MIDI Program Change messages, do
the following:
1.
Connect the VM200 to MIDI equipment capable of transmit-
ting Program Change messages.
See “Connecting MIDI devices” on page 175 for more information.
2.
Configure the VM200 to receive MIDI Program Change mes-
sages.
See “Program Change Messages” on page 177 for more informa-
tion.
3.
Assign Program Change messages to scene memories.
See “Program Change To Scene Memory Assignment Tables” on
page 210 for more information.
Note:
Press the [EXIT] key at any time to cancel this process.