Filter
Top Products
Touring the VM200
24
VM200 User’s Guide
Current Scene Status
The Current Scene Status section features only one key, which
shares its name.
When you press the
[CURRENT SCENE STATUS]
key, the VM200 enters
Current Scene Status mode and displays the
CURRENT SCENE STATUS
function page. The number and name of the scene (e.g.,
01:MY_SCENE
) appear in the top right of the display.
The
CURRENT SCENE STATUS
function page enables you to:
• Enable the EQ for channels 1-8, 9-16, or 1-16
• Turn on the ADD. AUX parameter (to enable AUX Sends 3&4)
• Set the Smoothing function to Level 1 or 2
• Set the record buss gain (REC-B.GAIN) from [
∞
to -90 to 0dB]
(available when ADD. AUX is off)
• Set the sends for AUX1, AUX2, AUX3, and AUX4, EFF1, and EFF2
to Pre-fader or Post-fader
• Pair AUX Sends (Aux1&2 or Aux3&4).
Key Mode Section
The Key Mode section features four function keys:
[ROUT-
ING/PHASE]
,
[PAIR/GROUP]
,
[CH VIEW]
, and
[CHANNEL/METER]
, as
described below.
[ROUTING/PHASE] Key
The
[ROUTING/PHASE]
key displays a sequence of three function
pages that let you control mixer routing, assign S/P DIF inputs to
channels, and invert the phase for each channel.
The
ROUTING
function page lets you route input channels 1–20 to the
Stereo Buss (ST BUS), the Record Buss (REC BUS), or the ADAT out-
put (DIRECT).
Press a Page Select key to specify Channels 1-8, 9-16, or 17-20. Then
press the
[EQ EDIT]
,
[SOLO]
, and/or
[ON]
key for each channel to route
the signal to a potential destination. The indicator in the chan-
nel/buss matrix highlights (dark square).
CURRENT SCENE STATUS
KEY MODE
PHASE GROUP
ROUTING/ PAIR/
CH VIEW
METER
CHANNEL/
MMC SEND