Filter
Top Products
Getting Started
50
VM200 User’s Guide
Examples of Other Function Pages
The name of the function page appears in the upper-left corner.
Note how the fader icons look like little faders on the following
CHANNEL
VIEW (CH VIEW)
function page.
You use the
[EQ EDIT]
,
[SOLO]
, and
[ON]
keys to toggle two-state indi-
cators. These indicators are represented on the display by small rect-
angles.
An empty rectangle indicates that the parameter or option is turned
“off.” A “filled” or solid dark rectangle indicates an “on” setting. (This
manual also refers to darkened indicators as “highlighted,” just to
confuse the tourists.)
Function Page Parameter Matrix
The display frequently arranges the parameters on a function page
in a matrix.
One such matrix displays four rectangles in a horizontal row, with
each rectangle containing a parameter. Beneath this appears another
row, which contains eight rectangles, as illustrated below.
On such a function page, the four Gain rotary controls adjust param-
eters in the top row, and the Freq and Q rotary controls adjust the
parameters in the bottom row.
Function Page Name
Fader icons show
fader position.
Level indicator
Filled or dark rectangle means “on”
Empty rectangle means “off”