Filter
Top Products
Digital Connections
162
VM200 UserÕs Guide
Word Clock Setup
The VM200’s internal word clock generator supports a sampling fre-
quency of 44.1kHz, the audio standard for music CDs.
You may also synchronize the VM200 to an external word clock.
WORD IN/OUT Connectors
These BNC connectors receive/transmit the word clock. You can
connect a device that has a WORD IN/OUT connector, such as the
Fostex VR800 digital multitrack recorder, to these connectors.
If the VM200 is the last device in the word clock chain, set the word
clock termination switch to ON.
Setting the Master Word Clock
Follow the steps below to set the master word clock.
1.
Press the
[SYSTEM]
key.
The VM200 displays the
SYSTEM
function page.
2.
Rotate the EQ/LO Gain control to select a master clock from
the following options:
INT44
Select this option to use the VM200 as the word clock
master.
ADAT44
Select this option to use the VM200 as a word clock slave,
syncing to the clock from an ADAT-compatible machine
running at 44.1kHz.
ADAT48
Select this option to use the VM200 as a word clock slave,
syncing to the clock from an ADAT-compatible pro audio
machine running at 48kHz.
S/PDIF44
Select this option to use the VM200 as a word clock slave,
syncing to the clock from a CD player or S/PDIF-compati-
ble machine running at 44.1kHz.
S/PDIF48
Select this option to use the VM200 as a word clock slave,
syncing to the clock from a connected CD player or
S/P DIF-compatible machine running at 48kHz.
WORD IN/OUT
WORD
OUTIN
75
OFFON
word clock termination switch