Filter
Top Products
Effects Parameters
VM200 User’s Guide 141
DUAL_DELAY (35)
3CH_DELAY (36)
HPF
THRU, Same as EQ
value [Hz]
Cut-off frequency of the high pass filter.
PAN1
L10.0–0.0–R100 (0.5 step) Pan position of the first delay.
PAN2
L10.0–0.0–R100 (0.5 step) Pan position of the second delay.
LPF
Same as EQ value [Hz],
THRU
Cut-off frequency of the low pass filter.
1. If you adjust DELAY TIME, NOTE will be automatically changed.
2. If you adjust TEMPO, DELAY TIME will be automatically changed.
3. If you adjust NOTE, DELAY TIME will be automatically changed.
Parameter Value Description
DLY TIME1/2
0.0–680.0 [ms] (0.1 step)
Delay time of DELAY 1 or 2.
1
1. If you change DELAY TIME, NOTE will be automatically changed.
TEMPO
30–250 [bps] (1 step)
Tempo value used to calculate DLY TIME1, DLY
TIME2, NOTE1, and NOTE2.
2
2. If you change TEMPO, DELAY TIME will be automatically changed. Two TEMPO
parameter rotary controls operate in sync.
DLY1/2NOTE
Note value used to calculate DLY TIME1 or 2.
3
3. If you change DELAY TIME or TEMPO, the closest note value will be selected.
DLY FB1/2
0–100 [%] (1 step) Amount of DELAY1 or 2 feedback.
DLY1/2HI-R.
0.1–1.0 (0.1 step)
High frequency amount of the DELAY 1 or 2 feed-
back.
DLY1/2PAN
L10.0–0.0–R10.0 (0.5 step) Pan position of the DELAY 1 or 2.
Parameter Value Description
DLY TIME
1/2/3
0.1–1360.0 [ms] (0.1 step) Delay time. (0.1 step when ENTER is pressed.)
DLY1/2/3
GAIN
0–100 [%] (1 step) Delay 1/2/3 level.
DLY1/2/3
PAN
L10.0–0.0–R10.0 (0.5 step) Delay 1/2/3 pan position.
FB DLY
TIME
0.1–1360.0 [ms] (0.1 step) Delay time of feedback
DELAY FB
0–100 [%] (1 step) Amount of delay feedback.
Parameter Value Description