Filter
Top Products
Touring the VM200
22
VM200 User’s Guide
Function Keys
This section provides a brief tour of the VM200’s numerous function
keys.
When you press certain function keys, such as
[SYSTEM]
or
[CURRENT
SCENE STATUS]
, the VM200 displays a “function page” of information
on the LCD Display Panel. Each function page contains parameters
that you can set to configure and control the VM200.
In many cases, repeatedly pressing a function key displays additional
pages of parameters. The sequence of pages cycles around to begin
again (i.e., page 1, 2, 3, 1, 2, 3...)
Other function keys, such as EFF1 in the Fader Mode section, do not
directly display information on the LCD Display Panel, but neverthe-
less configure or control the VM200 in other ways.
Some function keys are opaque grey. Others are translucent and
fixed above an LED light that can light up or flash to indicate status
information.
In general, the translucent function keys flash to indicate that they
are available for selection. Once selected, they remain lit.
SETUP
SYSTEM MIDI
Each time you press the [SYSTEM] key,
a subsequent function page is displayed.
Note: The procedures in this manual offer specific steps that you
can follow to accomplish certain tasks. Phrases such as “press
the function key twice” assume the function page cycle always
begins with the first function page. This may not always be the
case. If not, simply press the key repeatedly until the desired page
appears.