Fostex VM200 TV Cables User Manual


 
Effects
134 VM200 User’s Guide
Recalling Effects Programs
You can recall Effects programs 0 through 99.
1. Press the [EFF1] or [EFF2] key in the Eff Edit section to specify
the effects processor to which you want to recall the effect.
The VM200 displays the function page for the effect currently
loaded to the effects processor. The
[EFF1] or [EFF2] key you
selected lights up.
2. Press the [RECALL] key in the Eff Library section.
The VM200 displays the EFF LIBRARY RECALL function page, and the
[EFF1] or [EFF2] key flashes.
3. Use the Data Wheel or the [</-1] and [+1/>] keys to select the
desired effect program number from the program listing on
the function page.
4. Press the [ENTER] key.
The VM200 recalls the effect program to the specified effects pro-
cessor and displays the selected effect’s parameter function page.
5. You can press the [EXIT] key to return to Channel Edit mode
at any time.
Note: If an effect program in the library contains no data, the term
“NO_DATA” will appear on the display. You cannot recall such programs
until you store effect data in the program.
scroll list