Filter
Top Products
Receiving Bulk Dump Requests
VM200 UserÕs Guide
191
If you send too much data at once, you may overload MIDI devices
that have small data buffers. Setting a longer interval will allow
slower devices to process received MIDI data.
You can use an interval setting of 0 when you Bulk Dump between
multiple VM200s.
You can set the interval from 0–500 in 10ms increments.
5.
Press the
[ENTER]
key to send the specified Bulk Dump data
immediately, or press the
[EXIT]
key to return to the previous
screen.
Receiving Bulk Dump Requests
If the receive channel (RX CH parameter on the
1:MIDI TX&RX
function
page) and the DevID (device ID number) parameter on the VM200
match those of the sending device, the sending device will transmit
the specified Bulk Dump data to the VM200.
EQ LIB
EQ library user programs ALL, 50–99
PGM TBL1
Program Change Assign Table 1
(user-definable table)
N/A
CTL TBL1
Control Change Assign Table 1
(user-definable table)
N/A
Item Contents Block