Fostex VM200 TV Cables User Manual


 
Effects
140 VM200 User’s Guide
MONO_DELAY (33)
PAN_DELAY (34)
DENSITY
0–10 (1 step) Density of the reverb.
PRESENCE
-10–0–+10 (1 step)
2
Brightness in the high range of the reverb.
LPF
1.00kHz–20.2kHz, THRU
(step: same as EQ)
Cut-off frequency of the low pass filter.
1. 0: dead, 10: live
2. Brightness increases with a positive setting, and decreases with a negative setting.
Parameter Value Description
DELAY TIME
0.1–1360.0 [ms] (0.1 step)
Delay time.
1
1. If you adjust DELAY TIME, NOTE will be automatically changed.
TEMPO
30–250 [bps] (1 step)
Tempo value used to calculate DELAY TIME and
NOTE.
2
2. If you adjust TEMPO, DELAY TIME will be automatically changed.
NOTE
Note value used to calculate DELAY TIME.
3
3. If you adjust NOTE, DELAY TIME will be automatically changed.
DELAY FB
0–100 [%] (1 step) Amount of delay feedback.
LO RATIO
0.1–1.0 (0.1 step) Low frequency amount of the feedback.
HI RATIO
0.1–1.0 (0.1 step) High frequency amount of the feedback.
HPF
THRU, Same as EQ
value [Hz]
Cut-off frequency of the high pass filter.
LPF
Same as EQ value [Hz],
THRU
Cut-off frequency of the low pass filter.
Parameter Value Description
DELAY TIME
0.1–1360.0 [ms] (0.1 step)
Delay time.
1
TEMPO
30–250 [bps] (1 step)
Tempo value used to calculate DELAY TIME and
NOTE.
2
NOTE
Note value used to calculate DELAY TIME.
3
DELAY FB
0–100 [%] (1 step) Amount of delay feedback.
LO RATIO
0.1–1.0 (0.1 step) Low frequency amount of the feedback.
HI RATIO
0.1–1.0 (0.1 step) High frequency amount of the feedback.
Parameter Value Description