Filter
Top Products
95
Camera (Camera Properties) (continued)
Video Video Properties
Configure Video
Properties
^ Click to display the [Video Properties] screen.
Make detailed display settings for the selected camera.
Note:
● The displayed items and initial settings differ
depending on the camera. For details, see the
instruction manual of the camera.
Preview ^ For displaying the preview.
Audio Audio
selection
Default
microphone
^ This setting is applicable when microphones and/or a
speaker are used. Available microphones/speakers
vary depending on the camera.
Default speaker ^
Recording
Properties
Recording Recording
settings
Always
Never
Conditionally
Always: Select this check box to always record images.
Never: For recording images manually without
recording settings.
Conditionally: For setting the conditions to record
images.
● Default value varies depending on the camera.
● Configure settings below when you select
[Conditionally].
Built-in motion
detection
Select check box
ⅷ Do not select
check box
Select this check box to record all images where any
motion is detected.
Event Select check box
ⅷ Do not select
check box
Select this check box to start recording at the
occurrence of an event.
● If the [Event] check box is selected, set the start
event and stop event.
Start event ^
Stop event
Configure
Events
Hardware input
events
Manual events
Generic events
ⅷ ^
Select an event and click [Open] to display the settings
screen for the selected event.
Enable pre-
recording
Select check box
ⅷ Do not select
check box
Images before/after the occurrence of motion or an
event can be recorded. You can specify units of
seconds to record before/after the occurrence.
● Default value varies depending on the camera.
second(s) ^
Enable post-
recording
Select check box
ⅷ Do not select
check box
second(s) ^
Item Preset Values Description