Filter
Top Products
131
Performing Error Check
1
Click the [Start] button on the desktop and
select [Computer]
2 Right-click a drive to perform error check and
select [Properties]
The [Properties] screen of the drive you selected appears.
3 Click the [Tools] tab and click [Check now…]
The [Check Disk] screen of the drive you selected
appears.
4 Click [Start]
The error check starts.
Once the error check is completed, the result of the check
is shown.
5 Click [Close]
Performing Defragmentation
● Defragmentation may take several hours.
1 Click the [Start] button on the desktop, followed
by clicking [All Programs]
2 Click [Accessories] – [System Tools] – [Disk
Defragmenter]
The [Disk Defragmenter] window appears.
3 Right-click a drive to perform defragmentation
and click [Defragment disk]
Defragmentation of the selected drive starts.
● When the defragmentation is completed, current date
and time is displayed in the [Last Run] field.
4 Click [Close]
Initializing the Settings
Initialize the unit settings.
1 Double-click [4. Unit Setup] on the desktop
2 Click [Init Settings]
A confirmation message appears.
3 Click [Init]
4 Click [OK]
Caution:
● When the settings have been initialized, restart the unit.