Filter
Top Products
77
6
Deselect the [Enable dynamic path selection for
archives] check box, then click [OK]
You are returned to the [Camera Properties] screen.
7
Specify the path to the NAS drive in [Archiving path]
● The path can be set by specifying through the network
drive, or by setting the UNC path (network name and
folder name of NAS.)
● An error message will be displayed when setting;
however, there are no problems with recording
operations.
8 Click [OK]
Caution:
● You cannot play back past archive data if you change the
archiving destination after actual operations.
● When specifying NAS as the archiving destination, a
message stating that the path could not be confirmed may
be displayed; however, archiving will be performed
correctly.
● Perform the NAS setting only after the NAS device setting
is complete and when the device is connected to the
network.
● An error message may appear on the Smart Client and
live images may not be displayed for several minutes after
the NAS drive setting.