Filter
Top Products
123
Ⅵ Scheduling Profile Setting Descriptions
ⅷ Online Period
Note:
● If the event name for [Start event] or [Stop event] is too
long, it will not be displayed fully.
ⅷ Speedup
ⅷ E-mail Notification
Item Description
Set camera to
start/stop on
time
Select to set a period for which this
unit will constantly show images from
the camera. This is indicated by the
pink bar on the scheduling screen.
Set camera to
start/stop on
event
Select to display images at the
occurrence of the specified event. This
is indicated by the yellow bar on the
scheduling screen.
Start event/Stop
event
Select the event which brings the
camera online and the event which
takes in offline for when [Start up/shut
down the camera with an event] in
selected.
Start time/End
time/Day
Select the period (time/day) for which
the images from the camera are
displayed.
● You can also set the period by
dragging the mouse on the display
bar.
Set Period The period set by the [Start time] and
[End time] will be represented on the
bar display.
Change Period Adjust the period shown on the bar.
With the bar selected, enter and click
[Start time], [End time], and [Day].
Configure
Events
Select an event and click [Open]. The
setting screen of the selected event
will appear.
Item Description
Start time/End
time/Day
Select the period (time/day) for which
speedup recording is enabled.
● You can also set the period by
dragging the mouse on the display
bar.
Set Period The period set by the [Start time] and
[End time] will be represented on the
bar display.
Change Period Adjust the period shown on the bar.
With the bar selected, enter and click
[Start time], [End time], and [Day].
Item Description
Start time/End
time/Day
Select the period (time/day) for which
email notification is enabled.
● You can also set the period by
dragging the mouse on the display
bar.
Set Period The period set by the [Start time] and
[End time] will be represented on the
bar display.
Change Period Adjust the period shown on the bar.
With the bar selected, enter and click
[Start time], [End time], and [Day].