Filter
Top Products
164
<Viewer Part> Reference
Images and audio recorded on this unit can be saved
(exported) as video, still pictures, or in database format, and
be viewed on computers outside the surveillance system.
● A surveillance computer may write recorded images and
audio sounds to a USB flash memory or the desktop.
● When using a USB flash memory, connect the USB flash
memory to the front of this unit beforehand.
Saving as a Video or Still Image
1
Click the [Playback] tab
2 Enter start date/time and stop date/time in the
[Export] section
● When you click [Set] in [Start time], the date/time is
entered in the master time display part in [Time
Navigation].
● When you click [Set] in [End time], the date/time
displayed in the master time display part in [Time
Navigation] plus 1 second is entered.
Caution:
● You may fail to use [Export] if images to export contain
ones with a large time gap by changing the time. In this
case, export images separately, images before changing
the time and ones after changing the time. (Example:
summer time, etc.)
3 Select a camera from the [Source:] list
4 Click [AVI/JPEG Export…]
The export dialog will appear.
● Ensure that the start and end date/time and camera
name you entered are displayed.
Note:
● Preparation for export may take a while depending on
connection status of additional HDD(s).
5 Select the export format
● Select [AVI] (movie clip) or [JPEG] (still image).
● Select whether to display the time in the image to
export.
6 If you have selected [AVI], select a frame rate
● Select either [Full] to transmit all images to an AVI file,
or [Half] to transmit images for each second to
decrease the AVI file size (images are played back in
real time).
7 When AVI format is selected, select the codec
type from the [AVI codec] list
Saving Images and Audio
Sounds on a USB Flash
Memory (Export)