Filter
Top Products
55
Action Setup—Starting Recording
Recording is started upon the occurrence of any event.
Note:
● You can perform the same settings below by opening the
properties of each camera from [Hardware device] in
[Advanced Configuration]. (A Page 95 "Recording
Properties")
1 Click [+] in [Advanced Configuration]
2 Double-click [Cameras and Storage Information]
The [Recording and Storage Properties] window appears.
3 Select [Video Recording]
4 Select an event that starts recording
● Select the [Apply Template] check box and click [Apply]
to apply the settings selected in [Template - >] in the
upper part to all selected cameras.
Item Description
Always For recording images always.
(Recording is not triggered by an event.)
Motion
Detection
For starting recording by motion detection.
Event For starting recording by any event other than
motion detection.
Event and
motion
detection
For starting recording upon the occurrence of
an event including motion detection.