Filter
Top Products
98
<Recorder Part> Reference
Camera (Camera Properties) (continued)
PTZ Preset
Positions
(
A
Page 39)
PTZ preview ^ For directing the PTZ camera to any position.
Audio
selection
Default
microphone
^ This setting is applicable when microphones and/or a
speaker are used. Available microphones/speakers
vary depending on the camera.
Default speaker ^
PTZ preset
positions
PTZ Type Type 1 (stored on
server)
Type 2 (stored on
server)
Type 3 (stored on
camera)
Type 1 (stored on server): For setting and saving a
preset position on the server.
Type 2 (stored on camera): Click [Import/Refresh], then
read the preset position from the camera. The preset
position is saved on this unit.
Type 3 (stored on camera): Click [Import/Refresh]. The
preset position is imported from the camera and stored
on the camera.
Note:
● When using a JVC camera, it is recommended to
select the more positionally accurate [Type 3]. (Not
selectable depending on the camera.)
Add New ^ For adding a preset position you just set to the list.
Set New
Position
^ For modifying a preset position selected in the list. Use
the PTZ preview screen to modify the position.
Delete ^ For deleting a preset position selected in the list.
Tes t ^ For testing a preset position.
PTZ
Patrolling
Patrolling profiles ^ For displaying a defined patrol and creating a new
patrolling profile.
(
A
Page 41)
Patrolling
Profiles
^ For displaying a defined patrolling profile.
Add New ^ For creating a new patrolling profile.
Delete ^ For deleting a patrolling profile selected in the list.
Patrolling list ^ For editing the patrolling details.
Preset Positions ^ For displaying a defined preset position on the selected
camera. Select a preset position you want to add to the
patrolling profile and click [ ] and then it is added to
the profile.
Patrolling List ^ For displaying a preset position registered with the
patrolling profile. To delete it from the patrolling profile,
select a preset position you want to delete and click
[].
Wait time (sec.) ⅷ 10 For specifying the period for which the camera stops in
each preset position.
Transition time
(sec.)
ⅷ 5 For specifying the period for which the camera moves
between preset positions. During the period, motion
detection is disabled.
Item Preset Values Description