Filter
Top Products
97
Camera (Camera Properties) (continued)
General archiving settings for all cameras For configuring common archiving settings for all
cameras.
Configure
Dynamic
Paths...
Enable dynamic
path selection
for archives
ⅷ Select check box
Do not select check
box
Select this check box to automatically select an
archiving destination drive from the registered list.
The registered archiving destination will be listed along
with the drive, path, capacity and free space.
Deselecting the [Use] check box will disable the
selection.
Use ⅷ Select check box
Do not select check
box
Drive ^
Path ^
Drive Size ^
Free Space ^
New UNC path ^ For specifying a drive path you want to register for
automatic selection by dynamic path.
Event
Notification
Event
notification
Available events Hardware
Manual
Generic
You can view the yellow display in the title bar area on
the upper part of the live image display screen in case a
specific event occurs.
● Select an event from the [Available events] list and
move it to the [Selected events] list.
Selected events ⅷ None
Configure
events
Hardware input
events
Manual events
Generic events
ⅷ ^
Select an event and click [Open] to display the settings
screen for the selected event.
Output Output
activation
Available output ⅷ None For displaying the available output ports.
On manual
activation
ⅷ None For specifying an output port to output when a specific
event or manual event occurs.
On motion
detected
ⅷ None For specifying an output port to output when motion is
detected.
Configure
events
Hardware input
events
Manual events
Generic events
ⅷ ^
Select an event and click [Open] to display the settings
screen for the selected event.
Motion
Detection
and Exclude
Regions
(
A
Page 44)
Motion
detection
Sensitivity 0 to 256
ⅷ 40
For determining the level of change in the image pixel
that is to be recognized as motion. As the value is
decreased, the sensitivity is increased, and minor
changes in the pixels are recognized as motion.
Motion 0 to10000
ⅷ 640
For determining the number of pixels for which a
change is to be recognized as motion. When the slider
is moved from side to side, the black vertical line at the
bottom of the screen moves together, and the boundary
(Motion Sensitivity) is adjusted. When detected motion
exceeds the selected sensitivity level, the bar changes
from green to red, indicating a positive detection.
Motion detection
interval
ⅷ 240 milliseconds For specifying the motion detection interval.
Exclude
regions
Enable Select check box
ⅷ Do not select
check box
Select this check box to specify region(s) where the
motion detection is disabled.
Show Grid Select check box
ⅷ Do not select
check box
Select this check box to show the grid on the preview
screen.
Item Preset Values Description