Filter
Top Products
147
Displaying the Playback Screen
1 Click the [Playback] tab
The playback screen appears (it may take several minutes).
● If you configure camera recording settings when the
playback screen is active, playback images may not be
displayed correctly after you configure the camera
recording settings.
In this case, ACannot connect to server! RetryB or
ACannot connect to 127.0.0.1:80 on [device name]
(camera name)B will be displayed in the playback
screen. (127.0.0.1:80 is an IP address of this unit
during operations.)
● If you attempt to play back when there are no recorded
images, the playback screen keeps showing AConnect:
[NVR] Camera1 on 127.0.0.1:80B.
Note:
● The live indicator appears in the top bar of the playback
screen. It lights up in green each time new images are
displayed.
● Recorded images are saved as a database. Recording
data is called a database in this unit.
● If a message such as “Before database start” is displayed
in the playback screen, there is no database (recorded
images) before the current position.
● If a message such as “No data” is displayed in the
playback screen, there is no database (recorded images)
after the current position.
● If the timeline is not displayed correctly (for example, it is
split), switch the screen by clicking the [Live] or [Playback]
tab, then click the [Setup] tab again.
Caution:
● Do not switch between the live screen and the playback
screen frequently in a short time.
Viewing Recorded Images
Notes:
● The recording frame rate may decrease during
operations in the playback screen.
● When there is frequent access to the HDD, i.e. recorded
images are played back at the same time with
recording, playback images or audio sounds may be
interrupted. (This does not affect recording to this unit of
additional HDD.)
● When returning to the playback screen from the setting
screen, the microphone selection for the [Audio] section
may return to [None]. Reselect the microphone.
● Use the same time zone for the computer and this unit.
When you play back recorded images on a computer
with different time zone, the time of recorded images of
this unit will be converted to the computer’s time zone.
● If you want to change the time zone from date and time
settings, click the [×] button to exit the Smart Client and
restart.
1 6 5
2 43
Item Description
A [Playback] tab For displaying the [Playback]
screen.
B Operation
section
(A Page 148)
C Camera images Recorded images from the camera
D View Segmented display of recorded
images from multiple cameras
● Recorded images of the same
time and date (the time and date
displayed in the [Time
Navigation] section) are
displayed for all cameras in the
view.
E [Close] button For closing the view.
F View list For switching views.