73
6 Select [Yes: Disk on port 0] for [Do you want to
keep data from one of selected disk?], then click
[Next]
Caution:
● Keep [Enable volume write-back cache] in the advanced
settings disabled; otherwise, performance of the unit may
drop.
7 Click [Create Volume]
8 Click [▲] on the taskbar at the lower right corner
of the screen, and click [Customize]
[Selection of icon and notice to display on the taskbar]
starts up.
9 Change the setting of [IAStorIcon] to [Display
Icon and Notice]
10 Click [OK]
Ⅵ Creating a simple volume
After building a RAID5 or RAID10 configuration, follow the
procedure below to use free space of the HDD effectively.
1 Click the [Start] button on the desktop, followed
by clicking [Control Panel]
The control panel opens up.
2 Click [System and Security]
The [System and Security] window appears.
3 Click [Create and format hard disk partitions] on
[Administrative Tools]
The [Disk Management] window appears.
4 Right-click [Disk 0], and select [Convert to
Dynamic Disk....]
The [Convert to Dynamic Disk] window appears.