Filter
Top Products
32
<Recorder Part> Basics
7 Enter the IP address, subnet mask, and default
gateway
● Default settings are indicated below. To set values
other than the default values, consult your network
administrator.
Caution:
● Make sure to use LAN1 and LAN2 for different segments*.
Example:
LAN1: 192.168.0.
253
LAN2: 192.168.1.253
* Segment: Underlined sections
8 Click [OK]
The network has been configured.
Configure monitoring system settings such as registering a
camera or record settings using Management Application.
Follow the instructions from the wizard of XProtect
Enterprise to configure basic settings.
Starting Up Management
Application
1 Double-click [Management Application] on the
desktop
The top screen appears.
Follow the instructions of the wizard to register cameras and
configure basic settings of the cameras and recording.
Note:
● Settings of [Adjust Motion Detection...] and [Configure
User Access...] should be configured only when it is
necessary. (A Page 44, A Page 66)
Connect This Unit to a
Network (continued)
Item Default setting
IP address
LAN1 192.168.0.253
LAN2 192.168.1.253
Subnet Mask 255.255.255.0
Default gateway
LAN1 (None)
LAN2 192.168.1.254
Configuring Basic
Monitoring System
Settings