Filter
Top Products
59
6 Specify units of seconds to record before/after
the occurrence
7 Click [OK]
Note:
● A group of images before/after any motion/event is called
a sequence.
●
For how to use a sequence, refer to "Searching from the
Image List" (
A
Page 149) "Searching for Recorded
Images" (
A
Page 151).
Any abnormality in this unit or monitoring system can be
notified through e-mail.
Use 2 windows to configure mail settings.
ⅷ Notifications related to hardware
● Formatting of built-in HDD
● Formatting of external HDD
● Deterioration of built-in HDD reliability
● RAID abnormality (if applicable)
● Detection of heat radiation stoppage
ⅷ Notifications from Management Application or
Smart Client
● Motion detection
● Event occurrence
● Disconnection and restoration of communication with
cameras
● Archive error occurrence
Mail Settings of Unit Setting
1
Double-click [4. Unit Setup] on the desktop
The [Unit Setting] window appears.
Item Description
Enable pre-recording
To record images before any
motion/event, select this check
box and enter units of seconds
for recording.
Enable post-recording
To record images after any
motion/event, select this check
box and enter units of seconds
for recording.
Configuring Mail Settings