Filter
Top Products
154
<Viewer Part> Basics
Playing Back Recorded Images of
Different Times for Specific
Camera(s) (Independent Playback)
In the playback tab, recorded images of the same time are
played back all together for all cameras.
By using the independent playback function, you can view
images of different recording times for specific camera(s).
● Independent playback function can be used for multiple
cameras.
● Independent playback function can also be performed
from the view in the live tab.
1 Point the cursor to camera images in the view
The independent playback start button appears on the
camera images.
2 Click the independent playback start button
The camera’s title bar turns yellow and playback pauses.
To start playback, click [ ] to the right of the time and
date display.
3 Search for images you want to view
● The controller disappears when the cursor goes
outside of the camera image.
4 Click [ ] to finish independent playback
The color of the title bar returns to normal.
Note:
● If the camera window is displayed small, the slider is not
displayed. In this case, display the slider by maximizing
the Viewer or double-clicking the bar on the upper edge of
the camera window to enlarge it.
Listening to recorded audio sounds
You can listen to audio sounds (recorded sounds) of a
camera with a microphone.
Note:
● If the [Audio] section is not displayed, click [ ] to
display it.
1 Select an audio sound from the [Listen to] list in
[Microphones].
● To mute temporarily, select the [Mute] check box.
Caution:
● Audio sounds may be interrupted when more than one
surveillance computer plays back the sounds.
● When returning to the playback screen from the setting
screen, the microphone selection for the [Audio] section
may return to [None]. Reselect the microphone.
● No audio sound is output during still image display,
searching at other than forwardן1 speed or frame
advance playback.
● When any playback operation of recorded images is
performed during recording, playback sounds may be
interrupted.
Note:
● If any camera for which the audio sound setting is
specified, the specified audio sound will be output.
● If any camera for which the audio sound setting is not
specified, the last audio sound output will be used
continuously.
● [Speakers] cannot be used on the playback screen.
Searching for Recorded
Images (continued)
Item Description
A Time
and date
For displaying the date and time when the
image was recorded.
B For reverse/normal playback
●
Click once to use them as pause buttons.
C Slider
For changing playback speed during playback.
● Audio sounds will not be played back.
D For finishing independent playback.
1
32
2
4