Filter
Top Products
158
<Viewer Part> Applications
4 Select the area you set as [Hotspot] and
configure properties in the [Properties] section
Caution:
● The recording frame rate may decrease when the image
quality is changed. Use the [Full] setting since [Image
quality] settings affect the recording performance.
Note:
● You can use the hotspot feature to use a higher frame rate
for the hotspot and a lower frame rate for the other images
for your convenience.
● The orange frame indicates that the area in the frame is
set as a hotspot.
● When you set multiple views as hotspots and switch
views, the hotspot window you switched to shows camera
images that have been displayed in the view you switched
from.
You can display an HTML page instead of camera images.
1 Click the [Setup] tab
2 Click [HTML Page] in the [System Overview]
section and drag to a preferred position in the
view
3 Release the mouse button at a preferred
position
The [Open URL] window appears.
4 Enter a URL and click [OK]
Enlarging Images of a
Selected Camera (Hotspot)
(continued)
Item Description
Image quality For adjusting resolution and image
quality of images to display. Always
set this to [Full].
Frame rate Frame rate of the display.
Select from [Unlimited] (the same
as default and live settings),
[Medium] (25% frame rate), or
[Low] (5% frame rate) for the frame
rate set on the [Camera Properties]
screen.
Keep when
maximized
Select to preserve the set image
quality when enlarging the display
by double-clicking the camera
window. If not selected, full quality
will always be used when enlarging
the display.
Maintain image
aspect ratio
Select this check box to not
expand/contract images to the
display area size. Images will be
displayed at the original aspect
ratio.
Show For showing/hiding the title bar and
live indicator.
Displaying a Web Page
(HTML Page) in View