Filter
Top Products
153
Playing back Recorded Images
This section describes procedures to perform playback, stop,
and skip operations in the [Time Navigation] section of the
Smart Client.
Note:
● If the [Time Navigation] section is not displayed, click
[ ] to display it.
Functions of buttons and sliders are as follows.
ⅷ Browse buttons
Caution:
● The browse buttons are inactive unless a camera is
selected.
● It may take a while to complete movement after you click
the browse buttons . Note that clicking any of the
buttons in a row before completion of the movement will
move the sequence as a whole.
ⅷ [Time] slider
Drag the slider to the left to show older images and to the
right to show newer images. Use the upper slider for fine
adjustment in a limited time span (0.4 to 240 times), and the
lower slider for rough adjustment in a longer time span (20 to
36,000 times).
ⅷ [Playback] slider
Playback speed is normal with the slider at the center
position. Drag the slider to the left to decrease the playback
speed and to the right to increase the speed. Drag the slider
to the left end to pause.
The speed during playback is indicated in the upper right in
the master time display part.
ⅷ [Playback] buttons
Note:
● When the playback slider is at the left end (pause), the
playback buttons are inactive. Set the playback slider to a
preferred speed.
Ⅵ To skip parts with no recording
You can skip parts with no recorded images on the selected
camera during playback by selecting the [Skip gaps during
playback] check box in the [Time Navigation] section.
● When in split screen display, even when there are no
images recorded by the selected camera, if there are
images recorded by another camera this part will not be
skipped. In this case, the image shown last is displayed on
the camera with no recording.
:
Move to the previous image of the selected
camera. (Frame rewind)
:
Move to the next image of the selected camera.
(Frame advance)
:
Move to the top image of the previous sequence
of the selected camera. (The function may not
work properly depending on the existence or
length of the sequence.)
:
Move to the top image of the next sequence of
the selected camera. (The function may not
work properly depending on the existence or
length of the sequence.)
:
Move to the oldest recorded images of the
selected camera. (The function may not work
properly during playback at 10 or more times
faster than normal)
:
Move to the latest recorded images of the
selected camera. (The function may not work
properly during playback at 10 or more times
faster than normal)
: For reverse playback.
: For normal playback.
: For pausing playback.