Filter
Top Products
72
<Recorder Part> Applications
Building a RAID Configuration
You can add built-in HDD(s) to build a RAID configuration.
This unit is compliant to RAID 1/5/10.
Note:
● For addition of built-in HDD(s), consult an authorized
dealer or a JVC KENWOOD service center.
1 Turn on this unit
2 Click the [Start] button on the desktop, then
click [All Programs] > [Intel] > [Intel(R) Rapid
Storage Technology]
The Intel(R) Rapid Storage Technology is launched.
3 Click [Create]
4 Select the volume, then click [Next]
Note:
● Build RAID1, RAID5, or RAID10.
5 Select the HDDs to build the RAID configuration
Select [port 0] and the required additional HDDs ([port 1]
to [port 3]).
Adding an HDD (continued)
Item Description
RAID0/RAID1 Add one HDD, and build using a total of
two HDDs.
RAID5 Add two HDDs, and build using a total of
three HDDs.
RAID10 Add three HDDs, and build using a total of
four HDDs.