Filter
Top Products
35
4 Make the settings to receive images for each
camera
● Select the [Apply Template] check box and click [Apply]
to apply the settings selected in [Template - >] in the
upper part to all selected cameras.
5 Click [Next]
The frame rate setup screen appears.
6 Specify the frame rate and recording conditions
Configure the following items in order.
● Select the [Apply Template] check box and click [Apply]
to apply the settings selected in [Template - >] in the
upper part to all selected cameras.
Caution:
● Be sure to set the frame rate so that the total frame rate
does not exceed the performance capacity of this unit. For
the performance of this unit, see ARecording/Displaying
live images/Distribution performanceB (A Page 196).
Note:
● [Event] or [Event and motion detection] in [Record on] is
displayed when an event is specified.
7 Click [Next]
Item Description
Always on Always receive images from the
camera.
Always off Receive no images from the camera.
Item Description
Live Frame Rate For specifying frame rate for live
display.
Recording Frame
Rate
For specifying frame rate for
recording.
Record on Set the recording conditions.
● Always: records constantly.
● Never: select when only recording
manually.
● Motion detection: records when
motion is detected.
● Event: records when an event
occurs.
● Event and motion detection:
records when an events occurs
and motion is detected.
Pre-recording/
Post-recording
For specifying units of seconds
before and after the motion/event
when recording is set to start by
motion detection or an event
occurring in [Record on].