23
<
21
21
65
∫;
34
34
34
H
H
214
3
M
COUNT
Useful functions
Memory stop
2
Press the COUNTER button to establish the
counter display mode.
1
Press the STOP button to set the unit to the stop
mode.
3
Press the SEARCH button.
Check that “M” lights on the display tube and that
the memory stop mode is established.
Press the SEARCH button again if “AS” has
lighted.
4
Press the REW button if the counter reading is
higher than “00:00:00”; conversely, press the FF
button if it is lower (a negative value) than
“00:00:00.”
5
The counter reading approaches “00:00:00,” and
the tape is automatically set to the stop mode.
This function serves to rewind or fast forward the tape
to the “00:00:00” counter position and then
automatically set the unit to the stop mode when a
regular operation is being performed.
“M” lights.