Filter
Top Products
52
Menu page P10
[RS-232C PARAMETERS] P10
BIT LENGTH 7bit
STOP BIT STOP-1
PARITY ODD
BAUD RATE 9600
[USER ID REC]
00000000
RS-232C PARAMETERS screen
The RS-232C parameters are set on this screen.
Menu item Description of function
BIT LENGTH For setting the bit length.
7bit, 8bit
STOP BIT For setting the stop bit.
STOP-1, STOP-2
PARITY For setting the parity.
ODD, EVEN, NON
BAUD RATE For setting the communication speed (bps).
1200, 2400, 4800, 9600
, 19200
The underlining indicates the factory mode setting.
Setting menus
USER ID REC screen
Menu item Description of function
The user ID (max. 8 alphanumerics) is set on this screen.
By setting the user ID here, it will be recorded onto the recording
tape.
<Note>
The following 16 alphanumerics can be used.
0, 1, 2, 3, 4, 5, 6, 7, 8, 9, A, B, C, D, E, F