Filter
Top Products
57
O
Operation control commands
Data transmitted by PC Data returned from unit in response Description of command
[STX] OAF [ETX] [STX] OAF [ETX] Advances the tape frame by frame in the forward direction.
[STX] OAC [ETX] [STX] OAC [ETX] Releases the alarm signal input.
[STX] OAI:n [ETX] [STX] OAI [ETX] Inputs the alarm signal.
[STX] OAR [ETX] [STX] OAR [ETX] Advances the tape frame by frame in the reverse direction.
[STX] OEJ [ETX] [STX] OEJ [ETX] EJECT
[STX] OFF [ETX] [STX] OFF [ETX] FAST FORWARD
[STX] OPA [ETX] [STX] OPA [ETX] PAUSE
[STX] OPL [ETX] [STX] OPL [ETX] PLAY
[STX] OPR [ETX] [STX] OPR [ETX] REVERSE PLAY
[STX] ORC [ETX] [STX] ORC [ETX] RECORD
[STX] ORR [ETX] [STX] ORR [ETX] REC CHECK
[STX] ORW [ETX] [STX] ORW [ETX] REWIND
[STX] OSF:n [ETX] [STX] OSF [ETX] FORWARD SEARCH
[STX] OSP [ETX] [STX] OSP [ETX] STOP
[STX] OSR:n [ETX] [STX] OSR [ETX] REVERSE SEARCH
RS-232C
O
Media operation control commands
Data transmitted by PC Data returned from unit in response Description of command
[STX] HRE:m [ETX] [STX] HRE [ETX]
Sets the unit’s operation mode at the tape-end position
during recording.
[STX] HTI:m [ETX] [STX] HTI [ETX]
Sets the operation mode that is to be established when the
tape has been inserted.
[STX] HEE [ETX] [STX] HEE [ETX]
Sets the unit’s operation when the EJECT button is pressed
to EJECT.
[STX] HEA [ETX] [STX] HEA [ETX]
Sets the unit’s operation when the EJECT button is pressed
to REW
5
EJECT.
[STX] HRL:m [ETX] [STX] HRL [ETX] Sets the lock mode for the operation during recording.
[STX] HTR:m:b [ETX] [STX] HTR [ETX]
Sets the warning for when the tape-end position is about to
be reached.