Filter
Top Products
6
Parts and their functions
6
Display tube
1
=
Lights when a cassette tape is inserted.
It flashes when an error is detected as a result of
the recording review.
2
HIGH
Lights when a tape which was recorded in the
high picture quality mode is being played back
and when a tape is being recorded in the high
picture quality mode.
3
FRAME
Lights when a tape which was recorded in the
frame mode is being played back and when a
tape is being recorded in the frame mode.
4
SUM
Lights when the time is displayed in the summer-
time (daylight saving) mode.
5
TIME
Lights when the time is displayed.
6
COUNT
Lights when the tape counter value is displayed.
7
CAMERA
Lights when the camera number is displayed.
8
PASS
Lights when the number of repeated tape
recordings (passes) is displayed.
9
TIME MODE
Indicates the recording time mode.
:
Lights when repeat recording has been set.
;
M
Lights when the memory stop mode has been
set.
<
AS (S)
AS : Lights when the alarm search mode has
been set.
S:Lights when the time search mode has
been set. The lamp flashes while a search
is in progress.
=
ALARM
Lights during an alarm recording.
Flashes upon completion of the alarm recording.
>
REC
Lights during recording or rec-pause.
?
Video operation mode displays
: Playback
: Reverse playback
REC : Recording, recording monitoring
REC : Rec-pause
: Still picture (flashes during frame
playback), frame feed
: Fast forward, cue
: Rewind, review
@
REMAIN
Flashes when the tape end is approaching (when
the remaining tape alarm mode has been set).
A
LOCK
Lights when the lock mode has been set by the
LOCK switch or using the REC LOCK item on
the setting menu.
B
EXT
Lights when the external timer mode has been
set.
C
INT
Lights when the internal timer mode has been
set.
D
Counter display
Displays the time or tape counter value; displays
the error code when an error has occurred.
In addition, when a discrepancy has arisen
between the number of cameras set and the
number of cameras actually connected because
one of the cables connected to the CAMERA IN
connectors has been disconnected or loosened,
the camera number concerned will flash on the
display to warn the user.