Filter
Top Products
63
RS-232C
O
Query control commands
Data transmitted by PC Data returned from unit in response Description of command
[STX] QRV:m [ETX] [STX] VERdata [ETX] Queries the software version.
[STX] QSQ [ETX] [STX] LSQm:t [ETX] Queries the camera number and sequence mode settings.
[STX] QST [ETX] [STX] LSTdata1:data2 [ETX]
Queries the start date/time and end date/time settings for
daylight saving time.
[STX] QSU [ETX] [STX] LSUm [ETX] Queries the ON/OFF setting for daylight saving time.
[STX] QTL [ETX] [STX] TCSdata [ETX] Queries the current date setting.
[STX] QTC [ETX] [STX] TTSdata [ETX] Queries the current time setting.
[STX] QTR [ETX] [STX] HTRm:b [ETX]
Queries the setting for warnings when the tape-end position
is about to be reached.
[STX] QTY:n [ETX] [STX] LTYn:t:abcdefgh [ETX]
Queries the combination setting of the recording time mode
and number of cameras.
[STX] QUI [ETX] [STX] LUISdata [ETX] Queries the recording user ID setting.
[STX] QVC [ETX] [STX] VVCm:data [ETX] Queries the results of searching for video signal input.
[STX] QTA [ETX] [STX] TATmm:S [ETX]
Queries the setting for the time to be set when signals have
been input from the component connected to TIME ADJ IN
on the rear panel terminal section.
[STX] QVM [ETX] [STX] VMDm [ETX] Queries the color setting of the video output signals.
[STX] QWB [ETX] [STX] LWBm [ETX] Queries the buzzer setting in the auto OFF mode.
[STX] QXT [ETX] [STX] LXTm [ETX]
Queries the setting for acknowledging the input of the
external timer signal.
[STX] QRS [ETX] [STX] RSEm [ETX] Queries the search end mode setting.
[STX] QRR [ETX] [STX] LRRm [ETX] Queries the REC REVIEW setting.