Filter
Top Products
41
Menu page P2
[DISPLAY] P2
CHARACTER WHITE
POSITION R-BOTTOM
TIME SELECT 24HOURS
DATE ON
TIME ON
T-MODE ON
REC/ALARM ON
[REC LOSS INDICATOR]
VIDEO OUT CAMERA
[DAYLIGHT SAVINGS]
MODE OFF
<WEEK> <MONTH> <TIME>
START 1ST-SUN 4 2:00
END LST-SUN 10 2:00
Setting menus
DISPLAY screen
Menu item Description of function
CHARACTER For setting the type of characters which are displayed on the monitor
screen.
WHITE
: White characters with black borders are displayed.
BLACK : Black characters with white borders are displayed.
POSITION For setting the position where the characters are displayed on the
monitor screen.
L-UPPER : The characters are displayed at the top left of the
screen.
R-UPPER : The characters are displayed at the top right of the
screen.
L-BOTTOM : The characters are displayed at the bottom left of the
screen.
R-BOTTOM : The characters are displayed at the bottom right of the
screen.
CENTER : The characters are displayed in the center of the
screen.
TIME SELECT For setting the 12-hour or 24-hour system for the time.
24HOURS : The 24-hour system is used to display the time.
AM/PM : The 12-hour AM/PM system is used to display the time.
DATE For setting whether to display the date on the monitor screen.
ON
: The date is displayed on the monitor screen.
OFF: The date is not displayed on the monitor screen.
TIME For setting whether to display the time on the monitor screen.
ON : The time is displayed on the monitor screen.
OFF: The time is not displayed on the monitor screen.
T-MODE For setting whether to display the recording time mode and camera
number on the monitor screen.
ON
: The recording time mode and camera number are displayed
on the monitor screen.
OFF: The recording time mode and camera number are not
displayed on the monitor screen.
REC/ALARM For setting whether to display the alarm number and operation mode
on the monitor screen.
ON : The alarm number and operation mode are displayed on the
monitor screen.
OFF: The alarm number and operation mode are not displayed on
the monitor screen.
The underlining indicates the factory mode setting.
REC LOSS INDICATOR screen
Menu item Description of function
VIDEO OUT For setting the video signals to be output to the monitor screen in all
modes except the recording mode.
CAMERA : Video signals from the camera are output to the monitor
screen.
BLUE : The blue background signals are output to the monitor
screen.
The underlining indicates the factory mode setting.