Filter
Top Products
61
RS-232C
O
Query control commands
Data transmitted by PC Data returned from unit in response Description of command
[STX] QAL [ETX] [STX] ALV0 [ETX] Queries the address level.
[STX] QAM:m [ETX] [STX] LDmdata [ETX]
Queries the alarm recording and/or sensor recording
setting.
[STX] QBP [ETX] [STX] LBPm [ETX]
Queries the camera from which no video signals are to be
output.
[STX] QBR [ETX] [STX] LBRm [ETX]
Queries the buzzer setting for the results yielded by
performing REC REVIEW.
[STX] QBM [ETX] [STX] LBMm [ETX]
Queries the setting for the black burst signal processing
when the video signals are switched.
[STX] QCC [ETX] [STX] CCPdata [ETX] Queries the counter data (same as the QCD command).
[STX] QCD [ETX] [STX] CDdata [ETX] Queries the counter data (same as the QCC command).
[STX] QDA [ETX] [STX] LDAm [ETX]
Queries the output setting of the control signals to the
component connected to the ALARM OUT terminal.
[STX] QDB [ETX] [STX] DBm [ETX] Queries the color setting for the characters.
[STX] QDD [ETX] [STX] DDSd:t:m:r [ETX] Queries the display item setting for the monitor screen.
[STX] QDF [ETX] [STX] DFCm [ETX] Queries the display mode of the display tube.
[STX] QDM [ETX] [STX] DMSd:m:n [ETX] Queries the time display mode setting.
[STX] QDP [ETX] [STX] DPPmm [ETX] Queries the display position setting for the monitor screen.
[STX] QDS [ETX] [STX] LDSm [ETX]
Queries the selection of the mode (field or frame) for
performing still-picture playback.
[STX] QDW [ETX] [STX] LDWm [ETX]
Queries the setting for how the control signals are to be
output to the component connected to the WARNING/REC
OUT terminal.
[STX] QDX [ETX] [STX] LDXm [ETX]
Queries the setting to switch the EXT SW IN/VIDEO OUT
connector function.
[STX] QFS:nn [ETX] [STX] LFSnn:mmdd:p [ETX] Queries the free-set timer setting.
[STX] QDO [ETX] [STX] LDOdata1:data2 [ETX]
Queries the setting of the start and end times when the
control signals are to be output to the component connected
to the EXT TIMER OUT terminal.
[STX] QHI [ETX] [STX] HTIm [ETX]
Queries the operation mode that is to be established when
a tape has been inserted.
[STX] QHJ [ETX] [STX] HEm [ETX]
Queries the setting for the operation that is to be
established when the EJECT button is pressed.
[STX] QHL [ETX] [STX] HRLm [ETX]
Queries the lock mode setting for operations during
recording.
[STX] QHR:H [ETX] [STX] HTRdata [ETX] Queries the remaining tape amount.
[STX] QHT [ETX] [STX] HREm [ETX]
Queries the setting for the operation mode that is to be
established (during recording) at the tape-end position.
[STX] QIC [ETX] [STX] 1 [ETX] Queries the product area identification code.
[STX] QID [ETX] [STX] data [ETX] Queries the ID code of the unit.