Filter
Top Products
78
RS-232C
$
Time lapse control commands
These commands are not acknowledged while a search control command is being processed.
Data transmitted by PC Data returned from unit in response Description of command
[STX] LFS:nn:mmdd:p [ETX]
Parameter
nn = 00: Free-set timer is not set.
01—12: Free-set timer
number
mm = 01—12: Month
dd = 01—31: Day
p = 0: Sunday
1: Monday
2: Tuesday
3: Wednesday
4: Thursday
5: Friday
6: Saturday
F: Power OFF throughout the
day
[STX] LFS [ETX] Sets the free-set timer.
When a day which does not exist for the month has been
set, error code ERT is returned from the unit.
[STX] LIP:n:data1:data2:t [ETX]
Parameter
n = 1—8: Program registration
number (PGM1—PGM8)
data1 = hhmm (start time)
data2 = hhmm (end time)
hh = 00—23: Hours (24-hour
system)
mm = 00—59: Minutes
t = 0—6: Recording type (
RT0
—
RT6
)
[STX] LIP [ETX] Combines and registers three items—the recording start
time, recording end time and the recording type—as the
program for recording to be performed using the unit’s
internal timer.
[STX] LIW:abcdefgh:ijklmnop [ETX]
Parameter
a—p = 1—8: Program registration
number (PGM1—
PGM8)
F: Timer is not set.
a = Program 1 on Sunday
b = Program 1 on Monday
c = Program 1 on Tuesday
d = Program 1 on Wednesday
e = Program 1 on Thursday
f = Program 1 on Friday
g = Program 1 on Saturday
h = Daily program 1
i = Program 2 on Sunday
j = Program 2 on Monday
k = Program 2 on Tuesday
l = Program 2 on Wednesday
m = Program 2 on Thursday
n = Program 2 on Friday
o = Program 2 on Saturday
p = Daily program 2
[STX] LIW [ETX] Sets the weekly timer and daily timer.