Filter
Top Products
82
RS-232C
$
Time lapse control commands
These commands are not acknowledged while a search control command is being processed.
Data transmitted by PC Data returned from unit in response Description of command
[STX] LTY:n:t:abcdefgh [ETX]
Parameter
n = 1—6: Recording type
(RT1—6)
t = 0: 3-hour recording
1: 9-hour recording
2: 12-hour recording
3: 18-hour recording
4: 24-hour recording
5: 48-hour recording
6: 72-hour recording
7: 96-hour recording
8: 120-hour recording
9: 180-hour recording
A: 240-hour recording
B: 360-hour recording
C: 480-hour recording
D: 960-hour recording
F: OFF (setting of TIME
MODE button is complied
with)
a = Y or N: for setting cameras
No.1 and 2
b = Y or N: for setting cameras
No.3 and 4
c = Y or N: for setting cameras
No.5 and 6
d = Y or N: for setting cameras
No.7 and 8
e = Y or N: for setting cameras
No.9 and 10
f = Y or N: for setting cameras
No.11 and 12
a = Y or N: for setting cameras
No.13 and 14
h = Y or N: for setting cameras
No.15 and 16
Y: Used
N: Not used
[STX] LTY [ETX] Sets the combination of the recording time mode and
number of cameras.
[STX] LUI:data [ETX]
Parameter
data = U
7
U
6
U
5
U
4
U
7
U
3
U
2
U
1
U
0
An ASCII code is used to set the
user ID to be written onto the tape.
Binary 4BIT
a
8
7
ASCII code: 0—9, A—F
[STX] LUI [ETX] Sets the user ID (max. 8 alphanumerics).
By setting the user ID, it will be recorded onto the recording
tape.
<Note>
The following 16 alphanumerics can be used.
0, 1, 2, 3, 4, 5, 6, 7, 8, 9, A, B, C, D, E, F
[STX] LWB:m [ETX]
Parameter
m = N: Buzzer ON
F: Buzzer OFF
[STX] LWB [ETX] Sets whether the buzzer is to sound when a problem occurs
in the unit and the power is automatically turned off.