Filter
Top Products
83
RS-232C
$
Time lapse control commands
These commands are not acknowledged while a search control command is being processed.
Data transmitted by PC Data returned from unit in response Description of command
[STX] LWR [ETX] [STX] LWR [ETX] Deletes the POWER LOSS MEMORY data.
[STX] LXT:m [ETX]
Parameter
m = N: Signals are acknowledged.
F: Signals are not
acknowledged.
[STX] LXT [ETX] Sets whether the signals from the external timer connected
to the rear panel terminal section are to be acknowledged in
the external timer recording mode.