Filter
Top Products
64
RS-232C
$
Communication control commands
Data transmitted by PC Data returned from unit in response Description of command
[STX] RAN [ETX] [STX] RAN [ETX] Enables the return of the ACK (acknowledge) code.
<Note>
This command is not acknowledged while a search control
command is being processed.
[STX] RAF [ETX] [STX] RAF [ETX] Disables the return of the ACK (acknowledge) code.
<Note>
This command is not acknowledged while a search control
command is being processed.
[STX] RCK [ETX] [STX] RCK [ETX] Checks whether communication has been established.
<Note>
This command is not acknowledged while a search control
command is being processed.
[STX] RSE:m [ETX]
Parameter
m =
0: Normal
1: No command when search is
completed
2: No command when search is
completed/when error is
discovered
[STX] RSE [ETX] Sets the timing at which the search completion command is
to be sent and sets the enabling/disabling of the
transmission.
O
When “normal” is selected
When search is started: ACK code is returned.
When search is completed: [STX]
(((
[ETX] is
returned.
When search is suspended: [STX]ER
(((
[ETX] is
returned.
O
When “no command when search is completed” is
selected
When search is started: [STX]
(((
[ETX] is returned
after ACK is returned.
When search is completed: No return
When search is suspended: [STX]ER
(((
[ETX] is
returned.
O
When “no command when search is completed/when
error is discovered” is selected
When search is started: [STX]
(((
[ETX] is returned
after ACK is returned.
When search is completed: No return
When search is suspended: No return
<Note>
This command is not acknowledged while a search control
command is being processed.