Filter
Top Products
79
RS-232C
$
Time lapse control commands
These commands are not acknowledged while a search control command is being processed.
Data transmitted by PC Data returned from unit in response Description of command
[STX] LLL:m [ETX]
Parameter
m = N: Line-lock type
F: Internal sync and external
sync type
[STX] LLL [ETX] Sets the synchronization system of the camera/s
connected.
<Notes>
O
Use of the internal sync type of cameras is
recommended.
O
Select the ON setting when even one line-lock type of
camera is used.
[STX] LMA:m [ETX]
Parameter
m = F: Search mode OFF
M: Memory stop mode
A: Alarm search mode
[STX] LMA [ETX] Switches the search mode.
[STX] LNR:f:p:t [ETX]
Parameter
f = I: Field recording
R: Frame recording
p = H: HIGH
Recording at a high picture
quality
N: NORMAL
Recording at the standard
picture quality
t = 0—7: Recording type
(RT0—7)
[STX] LNR [ETX] Sets the recording mode, picture quality and recording type.
[STX] LMP:p:n [ETX]
Parameter
p = S: 1-screen display
0: 4-in-1 screen display;
Selected screen No.0
1: 4-in-1 screen display;
Selected screen No.1
2: 4-in-1 screen display;
Selected screen No.2
3: 4-in-1 screen display;
Selected screen No.3
n =
¢
: Camera No. is not
changed.
0—F: Camera No.1 to 16;
Camera number is
designated for the
screen No. selected by
parameter p.
1
32
0
[STX] LMP [ETX] Switches the screen display (4-in-1 or 1-screen display) and
sets the camera numbers.