Filter
Top Products
85
[STX] QCC [ETX] [STX] CCPdata [ETX]
Parameter
data = ghmmssff
g = Blank : With a positive (+) value
– sign : With a negative (–) value
h = 0—9: Hours (12-hour system)
mm = 00—59 : Minutes
ss = 00—59 : Seconds
Queries the current CTL counter data (in 1-second
increments).
RS-232C
$
Query control commands
Data transmitted by PC Data returned from unit in response Description of command
[STX] QBP [ETX] [STX] LBPm [ETX]
Parameter
m =
¢
: The video signals of all the
cameras are output.
0: Camera 1
1: Camera 2
2: Camera 3
3: Camera 4
4: Camera 5
5: Camera 6
6: Camera 7
7: Camera 8
8: Camera 9
9: Camera 10
A: Camera 11
B: Camera 12
C: Camera 13
D: Camera 14
E: Camera 15
F: Camera 16
Queries the camera whose video signals are not to be
output to the VIDEO OUT connector.
[STX] QBR [ETX] [STX] LBRm [ETX]
Parameter
m = N: Buzzer ON
F: Buzzer OFF
Queries the setting for whether the buzzer is to sound when
REC REVIEW reveals that the proper video level was not
maintained.
[STX] QCD [ETX] [STX] CDdata [ETX]
Parameter
data = fwghmmssff
f = F: Fine
C: Coarse
w = S: Search STILL
P: Search PLAY
g = Blank : With a positive (+) value
– sign : With a negative (–) value
h = 0—9: Hours (12-hour system)
mm = 00—59 : Minutes
ss = 00—59 : Seconds
ff = 00 (fixed) : Frames
Queries the current CTL counter data.