Filter
Top Products
108
Setup menus (continued)
<AUDIO> (continued)
The underlining (__) denotes the factory setting mode.
*1 When the 23/24 Hz mode, 25 Hz (HD, SD) mode, or the 50 Hz
(HD, SD) mode is selected in System Menu No. 25 (SYSTEM
FREQ), this item is not displayed.
No./Item Description of setting
755
SD SDI CH2
SL
For selecting the audio CH2 signal to be
superimposed onto the SD SDI output
0000 CH1
The CH1 signal is output.
0001 CH2
The CH2 signal is output.
0002 CH3
The CH3 signal is output.
0003 CH4
The CH4 signal is output.
0004 CH5
The CH5 signal is output.
0005 CH6
The CH6 signal is output.
0006 CH7
The CH7 signal is output.
0007 CH8
The CH8signal is output.
756
SD SDI CH3
SL
For selecting the audio CH3 signal to be
superimposed onto the SD SDI output
0000 CH1
The CH1 signal is output.
0001 CH2
The CH2 signal is output.
0002 CH3
The CH3 signal is output.
0003 CH4
The CH4 signal is output.
0004 CH5
The CH5 signal is output.
0005 CH6
The CH6 signal is output.
0006 CH7
The CH7 signal is output.
0007 CH8
The CH8signal is output.
757
SD SDI CH4
SL
For selecting the audio CH4 signal to be
superimposed onto the SD SDI output
0000 CH1
The CH1 signal is output.
0001 CH2
The CH2 signal is output.
0002 CH3
The CH3 signal is output.
0003 CH4
The CH4 signal is output.
0004 CH5
The CH5 signal is output.
0005 CH6
The CH6 signal is output.
0006 CH7
The CH7 signal is output.
0007 CH8
The CH8signal is output.
758
JOG PROC
For selecting how to process the digital audio
output slow signals in the JOG, VAR or SHTL
mode.
0000 OFF
The sound without having the digital audio output
slow signals processed is output even when the
STILL mode is established.
0001 ON
The sound after having the digital audio output
slow signals processed is output.
No./Item Description of setting
759
DV PB ATT
For selecting the audio output level during DV
format playback.
0000 OFF
The audio output level is not attenuated.
0001 ON
The audio output level is attenuated.
760*
1
REC PT
MUTE
For selecting whether to mute the sound at the
joins between recordings during DV or DVCAM
format playback.
0000 OFF
The sound is not muted.
0001 ON
The sound is muted
761*
1
AUDIO INT
SG
For selecting the type of internal signal.
0000 TONE
A sine wave signal is selected.
0001 SILNCE
A silent signal is selected.
762
AUD RATE
CON
This item enables signals to be recorded and
played back without passing them through the
rate converter in the audio input/output section
(without engaging the digital filter).
0000 OFF
The signals are recorded and played back with-
out passing them through the rate converter.
0001 ON
The signals are recorded and played back after
passing them through the rate converter.
<Note>
z ON/OFF control is exercised at the same time for
CH1 to CH8. ON or OFF cannot be set indepen-
dently for each channel.
z When the rate converter is turned OFF, video
input must be synchronized with the reference
signal selected in [OUT REF]. (If they are not
synchronized, noise may be generated.)
z In the 60 Hz mode, noise may occur if OFF is set
for the rate converter.
763
METER
SCALE
(This menu is
not displayed
for AJ-
HD1800E.)
For selecting the scale display of the audio
level meter.
0000 PEAK_0
The audio level is displayed with 0 dB as the
maximum level.
0001 REF_0
The audio level is displayed with 0 dB as the
reference level.
<Note>
When FS-18 or FS-12 is selected in Setup Menu
No. 776 (REF LEVEL), the system operates as
PEAK-0 regardless of the settings in this menu.
776
REF LEVEL
For setting the standard audio level (Headroom)
0000 FS-20
20 dB
0001 FS-18*
18 dB
0002 FS-12
12 dB
* The asterisk denotes the factory setting for
AJ-HD1800E.