Filter
Top Products
33
Automatic Editing (deck-to-deck) (continued)
Previewing
1 After the edit points have been registered, press the
PREVIEW button.
Regular preview is now conducted.
<Notes>
z If the edit IN point has not been registered, the position
where the PREVIEW button was pressed is registered
as the edit IN point.
z To stop the preview at any time, press the STOP but-
ton.
z When the PREVIEW button is pressed again after the
IN point during the course of a preview, the preview will
start again from the beginning.
z When the edit OUT point is reached, the tape is pos-
trolled, after which it stops automatically.
Automatic editing
1 Press the AUTO EDIT button.
Automatic editing is now executed.
z To suspend editing at any time, press the STOP
button.
z When the edit OUT point is reached, the tape is
postrolled, after which it stops.
Postrolling
In the case of assemble editing, editing continues for
about 2 seconds after the edit OUT point is passed, and
the tape is then returned to the OUT point, after which it
stops.
In the case of insert editing, the PLAY mode is
established after the edit OUT point has been passed,
and the tape is then returned to the OUT point, after
which it stops.
Retry function
Even when the STOP button has been pressed to
suspend editing, editing can be repeated from the
beginning simply by pressing the AUTO EDIT button
again.
Auto tag function
If, upon completion of editing, when the AUTO EDIT
button is pressed although the next edit point has not yet
been registered, the previous edit OUT point is
registered as the IN point, and editing is executed.
To release the auto tag mode, press one of the transport
system buttons (such as the PLAY button).
<Note>
The registered points are automatically cleared after
editing has been executed. However, the previous edit
points can be recalled by pressing the TRIMi (or
TRIMj) button and SET button at the same time.
Reviewing
1 Upon completion of the editing, press the REVIEW
button.
Review is now started by the recorder.
z To stop the review at any time, press the STOP button.
z When the edit OUT point is reached, the tape is
postrolled, after which it stops.
1
1
1