Filter
Top Products
80
System menus
The underlining (__) denotes the factory setting mode.
Video output signal adjustments
The control matrix for the adjustments is shown in the table
below.
External encoder remote controller:
Only adjustments of the external encoder remote
controller are performed.
This unit
Only adjustments of the setup menu items are performed.
External encoder remote controller/this unit
Adjustments can be performed from both the external
encoder remote controller and setup menus.
<Note>
Use the AJ-ER50, an optional accessory, as the external
encoder remote controller. However, its VIDEO PHASE and
SYNC PHASE controls will not work.
When “CMPST” has been selected as the setup menu item
No.650 (STYLE) setting
External encoder remote controller:
Only adjustments of the external encoder remote
controller are performed.
This unit:
Only adjustments of the setup menu items are performed.
External encoder remote controller/This unit:
Adjustments can be performed from both the external
encoder remote controller and setup menus.
<Note>
Use the MT-2000 (manufactured by Musashi and
recommended by Panasonic) as the external encoder
remote controller. However, its VIDEO PHASE, SYNC
PHASE and SC PHASE controls will not work.
No./Item Description of setting
05
ENCODER
SEL
For setting whether to perform the various
adjustments for the video output signals using this
VTR or using an external encoder remote controller.
0000 REMOTE
The various adjustments for the video output
signals are performed by an external encoder
remote controller.
0001 LOCAL
The various adjustments for the video output
signals are performed using this VTR.
0002 BOTH
The various adjustments for the video output
signals are performed using both this VTR and
an external encoder remote controller.
<Notes>
z When an adjustment is made with the external
encoder remote controller, the new values are
reflected in the appropriate section of the Setup
Menu. The adjusted values are stored on the unit
approximately 5 seconds after making the
adjustment. To turn off the power after making
the adjustment with the external encoder remote
controller, wait approximately 5 seconds or more
after completion of the operation before turning
the power off.
z For the IEEE 1394 digital output, settings are
disabled in this menu.
06
V LEVEL
CTRL
For selecting what is to be controlled when the
video output level is to be adjusted by an
external encoder remote controller.
0000 HD
The HD video output level can be adjusted.
0001 SD
The SD video output level can be adjusted.
0002 BOTH
Both the HD and SD video output levels can be
adjusted.
<Note>
When [CMPST] is selected in Setup Menu No.
650 (STYLE), [BOTH] is selected be default
regardless of the settings for this item.
Setting Adjustment item
05:
ENCODER
SEL
06:
V LEVEL
CTRL
653: Y LVL (HD)
654: Pb LVL (HD)
655: Pr LVL (HD)
656: BK LVL (HD)
658: Y LVL (SD)
659: Pb LVL (SD)
660: Pr
VL (SD)
661: BK LVL (SD)
REMOTE HD
External encoder
remote controller
No adjustments
possible
SD
No adjustments
possible
External encoder
remote controller
BOTH
External encoder
remote controller
External encoder
remote controller
LOCAL HD
This unit This unit
SD
BOTH
BOTH HD
External encoder
remote controller/
this unit
This unit
SD
This unit
External encoder
remote controller/
this unit
BOTH
External encoder
remote controller/
This unit
External encoder
remote controller/
this unit
Setting Adjustment item
05:
ENCODER
SEL
06:
V LEVEL
CTRL
662: V LEVEL
663: C LEVEL
664: HUE
665: SETUP LVL
REMOTE HD
External encoder
remote controller
SD
BOTH
LOCAL HD
This unit
SD
BOTH
BOTH HD
External encoder
remote controller/This
unit
SD
BOTH