Filter
Top Products
43
Function menus (continued)
<HOME> (continued)
Status display 2
Status display 3
Operation mode (speed) display
This indicates the current operation mode (including the
speed display).
Indicator Description of setting
This lights when the SCH phase of
the SDREF signal is within the
prescribed range.
This lights when color framing is
locked.
This lights during recording or
playback in the drop frame mode.
<Note>
If the time code data could not be
read properly (“T¢R” is displayed),
the display of the previous status is
held.
Indicator Description of setting
For EE mode, this indicates that UMID information is
available in input information.
When a tape is played back, this indicates that UMID
information is available on the tape.
When [SQUEEZ] is selected in Setup Menu No. 620
(DOWNCON MODE) and down convert output is set
to wide screen, this indicates that wide screen
information is recorded on the tape for SD tape
playback.
This indicates that the gamma function is selected in
Setup Menu No. 693 (GAMMA SEL).
This is indicated when the function button
(VERMEM) of <HOME SHIFT> is turned [ON].
Whenever is displayed, the variable memory is
operable. (For details, refer to [Variable memory
function].)
SCH
CF
DF
UM
WD
GM
VM
F6
VM
Display Operation mode
EJECT Eject mode
STANDBY OFF Standby OFF mode
T.RELEASE Tension release mode
STOP Stop mode
PREROLL Preroll mode
PLAY Playback mode
PLAY +
Special playback (playback phase adjustment)
mode (FWD direction)
PLAY j
Special playback (playback phase adjustment)
mode (REV direction)
REC Recording mode
JOG
REV/STILL/FWD
Jog mode
VAR (speed)
[j4.9 to i4.9]
Slow mode
SHTL (speed)
[j32.0 to i32.0]
Shuttle mode
FF Fast forwarding mode
REW Rewinding mode
EDIT Editing mode
AUTO EDIT Automatic editing mode
PREVIEW Preview mode
REVIEW Review mode
When function F6 (VARMEM) on <HOME SHIFT> is “ON”
DSPD (speed)
[j1.0 to i2.0]
Initial speed setting of variable memory
DSMP (speed)
[j1.0 to i2.0]
Playback speed memory mode of variable
memory
DPLY (speed)
[j1.0 to i2.0]
Playback mode of variable memory
DPRV (speed)
[j1.0 to i2.0]
Preview mode of variable memory editing
DEDT (speed)
[j1.0 to i2.0]
Execution mode of variable memory editing