Filter
Top Products
56
Function menus (continued)
<CUE> (continued)
Search operations
Turn the ADJUST dial to highlight the desired registered
point.
When the PREROLL button is pressed, the preroll operation
is initiated. The tape will not be prerolled if no cue points
have been registered.
Since the tape is not prerolled even if the PREROLL button
is pressed when the cue point registration mode is
established, be absolutely sure to check that the search
mode is established.
[The time selected by the <CUE SHIFT> menu [ (CU-
ROL) setting, which is different from the normal preroll time,
takes effect as the preroll time in this mode.]
The underlining (__) denotes the factory setting mode.
F5
Function button/
item
Switching
method
Setting
Corresponding setup menu
item
Description of setting
F1
PREV
Press
___
___ For multi-cue page forward scrolling.
F2
NEXT
Press
___
___ For multi-cue page forward scrolling.
F3
MODE
Toggle
SEARCH
ENTRY
___
For selecting the search or cue point
registration mode.
F4
CLR
Press
___
___
For clearing the currently selected cue data.
ENTRY must be selected as the (MODE)
setting.
F5
AL CLR
FiPress
___
___
When MANU is selected by +
(PAGE): All the cue data on the currently
displayed page is cleared.
When AUTO is selected by +
(PAGE): All the cue data on all the pages is
cleared.
F6
___
___
___
___ ___
F1 (SHIFT)
___
___
___
___ ___
F2 (SHIFT)
CARD
FiPress
___
___ For calling the MULTI CUE file operation menu.
F3 (SHIFT)
PAGE
Toggle
MANU
AUTO
No. 131
PAGE MODE
Refer to the setup menu.
F4 (SHIFT)
ROTATE
Toggle
OFF
ON
No. 132
ROTA MODE
Refer to the setup menu.
F5 (SHIFT)
CU-ROL
Toggle i ADJ
0s --- 5s --- 15s
No. 011
CU-ROLL TIME
Refer to the setup menu.
F6(SHIFT)
___
___
___
___ ___
F3
SHIFT
F3
SHIFT
F3