Filter
Top Products
48
Function menus (continued)
<HOME> (continued)
*
1
When the 23/24 Hz mode, 25 Hz (HD, SD) mode, or the 50 Hz (HD, SD) mode is selected in System Menu No. 25 (SYSTEM
FREQ), this item is not displayed.
*
2
When the 23/24 Hz mode, 25 Hz (HD, SD) mode, or the 50 Hz (HD, SD) mode is selected in System Menu No. 25 (SYSTEM
FREQ), the CTL cannot be selected. The TC is selected when turning on the power.
The underlining (__) denotes the factory setting mode.
Function button/
item
Switching
method
Setting
Corresponding setup menu
item
Description of setting
F1
OUTPUT
Toggle
TAPE
EE
No. 140
OUTPUT
For selecting the output signals.
<In the STOP mode>
TAPE: In the STOP mode, the signals played
back from the tape are output.
During recording or editing (*),
simultaneous playback signals are
output.
*: Setup menu item No.302 (CONFI
EDIT) must be set.
EE: The input signals selected by the setup
menu items No.600 (VIDEO IN SEL)
and No.713 (CH1 IN SEL) to No.724 (D
IN SEL 78) settings are output.
F2
___
___
___
___ ___
F3
TC/CTL*
2
Toggle
TC
UB
CTL
___
For selecting the time counter display.
TC: The time code value is displayed.
UB: The user bits value is displayed.
CTL: The control signal (time data) is
displayed.
F4
TC CLR*
1
Press
RESET
___
For resetting the time counter display.
If the button is pressed while the control
signal (time data) is displayed on the time
counter, it is reset to zero.
F5
CMP MD
F i toggle
NORMAL
DARK
No. 689
COMP MODE
Refer to the SETUP menu.
<Note>
When the 23/24 Hz mode, 25 Hz (HD, SD)
mode, or the 50 Hz (HD, SD) mode or the 50 Hz
mode is selected in Setup Menu No. 25
(SYSTEM FREQ), this item is not displayed.
F6
R INH
F i toggle
OFF
ALL
PRE
NORM
V/CTL
No. 113
REC INH
Refer to the setup menu.
<Note>
The set
ting can be changed from OFF to ALL
simply by operating the function button without
pressing the button.
F1(SHIFT)
PREROL
Toggle i ADJ
0s --- 5s --- 30s
No. 000
P-ROLL TIME
Refer to the setup menu.
F2(SHIFT)
___
___
___
___ ___
F3(SHIFT)
OUTREF
F i toggle
AUTO
INPUT
HD_REF
SD_REF
E-AUTO
No. 031
OUT REF
Refer to the setup menu.
F4(SHIFT)
CAPSTN
F i toggle
2F
4F
No. 109
CAP. LOCK
Refer to the setup menu.
F5(SHIFT)
___
___
___
___ ___
F6(SHIFT)
VARMEM*
1
Toggle
OFF
ON
___
For selecting the variable memory mode.
OFF:The variable memory mode is not used.
ON: The status is established in which variable
memory playback or variable memory
editing is enabled.
F4
F