Filter
Top Products
81
System menus (continued)
The underlining (__) denotes the factory setting mode.
*UP: This is for HD outputs (during HD tape playback or up-
conversion outputs).
*DW: This is for SD outputs (during SD tape playback or
down-conversion outputs).
No./Item Description of setting
12
SYS H
(HD)
*UP
For adjusting the HD SDI output system phase
in 13.5nS steps.
j: To advance the phase. i: To delay the phase.
<59/60Hz> <23/24Hz>
<50Hz>
<25Hz(HD,SD)>
<50Hz(HD,SD)>
0000 -2200
: :
2200
0
: :
4400 2200
0000 -2750
: :
2750
0
: :
5500 2750
0000 -2640
: :
2640
0
: :
5280 2640
14
SYS SC
(SD)
*DW
For adjusting the system phase of the analog
composite output and the SD SDI output
Variable range: +/- 180 degrees or more
j: Advance, i: Delay
<59/60Hz>
<23/24Hz>
<50Hz>
<25Hz(HD,SD)>
<50Hz(HD,SD)>
0000 -108
: :
0108
0
: :
0216 108
0000 -115
: :
0115
0
: :
0230 115
<Note>
This is disabled for 60 Hz/24 Hz.
15
VO SYS
H (SD)
*DW
For adjusting the system phase of the analog
composite output
37nS step
j: Advance, i: Delay
<59/60Hz,>
<23/24Hz>
<50Hz>
<25Hz(HD,SD)>
<50Hz(HD,SD)>
0000 -1716
: :
1716
0
: :
3432 1716
0000 -1728
: :
1728
0
: :
3456 1728
16
SD SYS
H (SD)
*DW
For adjusting the system phase of the SD SDI
output
37nS step
j: Advance, i: Delay
<59/60Hz,>
<23/24Hz>
<50Hz>
<25Hz(HD,SD)>
<50Hz(HD,SD)>
0000 -1716
: :
1716
0
: :
3432 1716
0000 -1728
: :
1728
0
: :
3456 1728
No./Item Description of setting
18
SCH (SD)
*DW
For adjusting the SCH (Sub Carrier to
Horizontal) phase of the analog composite
output
Press to move to the sub menu window. To
return from the sub menu window, press
again.
Submenu screen
00
COARSE
For adjusting the SCH phase in 90o steps
(The SC phase changes, and the H phase remains
unchanged.)
0000 0
0001: 90
0002: 180
0003: 270
01
FINE
For adjusting the SCH phase over a total
variable range of more than d45o.
j
: To advance the phase. i: To delay the phase.
(The SC phase changes, and the H phase
remains unchanged.)
0000 -32
: :
0032
0
: :
0064 32
SHIFT
SHIFT