Filter
Top Products
97
Setup menus (continued)
<VIDEO> (continued)
*1 When the 23/24 Hz mode, 25 Hz (HD, SD) mode, or 50 Hz
(HD, SD) mode is selected in System Menu No. 25 (SYSTEM
FREQ), this item is not displayed.
*2 When the 25 Hz (HD, SD) mode or 50 Hz (HD, SD) mode is
selected in System Menu No. 25 (SYSTEM FREQ), this item is
not displayed.
*3 When the 23/24 Hz mode, 25 Hz (HD, SD) mode, or 50 Hz
(SD) mode is selected in System Menu No. 25 (SYSTEM
FREQ), this item is not displayed.
The underlining (__) denotes the factory setting mode.
No./Item Description of setting
623
D/C RESP
V
For selecting the vertical frequency band
during down-conversion and line conversion
(1080i <> 720p).
0000 WIDE
0001 STD
624*
2
U/C RESP
H
For selecting the horizontal frequency band
during up-conversion and line conversion.
0000 STD
0001
NARROW
625
*
2
U/C RESP
V
For selecting the vertical frequency band
during up-conversion and line conversion.
0000 STD
0001
NARROW
626
D/C ENH
H
For accentuating the horizontal contours
during down-conversion and line conversion
(1080i <> 720p).
0000 0dB
0001 +0.7dB
0002
+1dB
0003 +1.2dB
0004 +1.5dB
0005 2dB
<Note>
The numbers on the superimposed display are
approximations only.
627
D/C ENH V
For accentuating the vertical contours during
down-conversion and line conversion
(1080i <> 720p).
0000 0dB
0001 +0.7dB
0002
+1dB
0003 +1.2dB
0004 +1.5dB
0005 2dB
<Note>
The numbers on the superimposed display are
approximations only.
628*
2
U/C ENH H
For accentuating the horizontal contours
during up-conversion.
0000 0dB
0001 +0.7dB
0002
+1dB
0003 +1.2dB
0004 +1.5dB
0005 2dB
<Note>
The numbers on the superimposed display are
approximations only.
629*
2
U/C ENH V
For accentuating the vertical contours during
up-conversion.
0000 0dB
0001 0.7dB
0002
+1dB
0003 1.2dB
0004 +1.5dB
0005 2dB
<Note>
The numbers on the superimposed display are
approximations only.
No./Item Description of setting
630
*
1
1080i
>
HD_
OUT
For selecting the HD output signal format
during 1080i tape playback or in the 1080i EE
mode.
0000 1080i
0001 720p
<Note>
When [SD SDI] is selected in Setup Menu No. 600
(VIDEO IN SEL), images are output in the format
selected in Setup Menu No. 020 (SYS FORMAT)
regardless of the settings in this menu.
632
*
3
720p
>
HD_
OUT
For selecting the HD output signal format
during 720p tape playback or in the 720p EE
mode.
0000 1080i
0001
720p
<Note>
When [SD SDI] is selected in Setup Menu No. 600
(VIDEO IN SEL), images are output in the format
selected in Setup Menu No. 020 (SYS FORMAT)
regardless of the settings in this menu.
636
*
1
SD
>
HD_
OUT
For selecting the HD output signal format while
playing back an SD tape (DVCPRO50/DVCPRO/
DV/DVCAM).
0000 1080i
0001 720p